Products

Wire rope bushing press

Product description: Wire rope bushing press is widely used in steel, port, transportation, engineering construction and other industries. Compared with the traditional techniques such as pressing and inserting, the wire
INQUIRY

The operation flow of the wire rope pressing sleeve machine

Before use, the hydraulic oil (domestic no. 30 or 40 hydraulic oil or other hydraulic oil with moving viscosity of 27-43m3/s when the oil temperature is 50℃) is injected from the air filter. The hydraulic oil injected is filtered by the filter, and the filtration accuracy is less than or equal to 15um oil level and reaches the middle line of the liquid level gauge.

Before pressing, select the corresponding consolidation pipe, mold and pressure according to different compression rope diameters, and use the consolidation pipe to cover the steel wire rope. The end of the steel rope must expose the joint 0.5-1.0D, and coat the mold cavity with lubricating fluid in order to start the mold.

During the suppression process, special attention should be paid to:

1. The molds are aligned up and down, and it is strictly forbidden to be misaligned. If the upper and lower mold cavities are misaligned, the clamped cable buckles will become the picture.

2, according to the diameter of the wire rope, select the corresponding mold, solid pipe.

型號	YSB-300	YSB-500	YSB-1000	YSB-2000
最大壓力	3，000KN	5，000KN	10，000KN	20;000KN
一次壓制最大繩徑	φ25mm	φ32mm	φ46mm	ф65mm
多次壓制最大繩徑	φ32mm	φ42mm	φ56mm	ф81mm
最大工作壓力	28Mpa	28Mpa	28Mpa	38Mpa
最大位移量	70mm	85mm	185mm	220mm
整機長度	1550mm	1680mm	2080mm	2480mm
整機高度	161Omm	1715mm	1125mm	2710mm
整機寬度	600mm	620mm	2175mm	1150mm
活塞上行速度	4.8mm/sec	3.6mm/sec	快速上行速度 29mm/sec	0.4mm/sec
活塞上行速度	4.8mm/sec	3.6mm/sec	工作上行速度 3.8mm/sec	0.4mm/sec
活塞下行速度	25.1mm/sec	22mm/sec	24mm/sec	3.2mm/sec
凈重	2250Kg	3100Kg	6745Kg	13400Kg
顏色	藍或綠Blue or Green			藍色